Anchoring

The StakeOutPole has a 6061- T6 machined aluminum tip and a rigid foam grip with an adjustable length lanyard and Stainless Spring Clip to secure to your kayak.  The fiberglass StakeOutPole is 1 inch in diameter with 1/8 inch wall thickness for durability.  The length is 5 feet.  The StakeOutPole used in conjunction with our Anchor Trolley Kit allows you to position your kayak for perfect lure or bait presentation.  The StakeOutPole may also be used instead of an anchor to secure your kayak through a scupper hole.  This is a much quicker and quieter operation than using a noisy anchor.  The StakeOutPole will increase your kayak fishing success and enjoyment.  Be sure to check out our other kayak fishing accessories.   

 

 

 

MSRP: $69.95

We wanted to carry an anchor trolley that would not only be functional and durable but easy to install. We also wanted to limit the amount of holes you are drilling into the kayak so every component is fastened with a single hole as opposed to using deck loops which need 2 holes drilled each and will wear from friction. We compiled what we feel is a great system and can be installed on the kayak in 10 minutes. This system is designed to work with an anchor, drift sock or a stake-out pole and is a bow to stern system.

Constructed with industrial strength, weather resistant, fabric, foam, webbing and brass.
Conical shape contracts from 54” inch circumference (27" across) to 11” circumference.

Parachute design slows the kayak allowing for more consistent trolling.
Includes adjustable 6' length of 1” heavy duty webbing with marine grade, brass clip.

Utilizing the same industrial strength webbing, fabric, and foam as our kayak seats, the Drift Chute is a hand made, top of the line, kayak fishing accessory built from the ground up with the professional angler in mind. The concept is simple: a foam packet, securely sewn into the top of the Drift Chute, floats near the surface of the water while a weighted packet, securely sewn into the bottom of the Drift Chute, sinks below the surface. These opposing elements keep the Drift Chute's large, 54” circumference fully expanded as you slowly troll through the water. The effect is similar to that of a parachute falling through the air; your kayak, and thus the poles that you troll with, are slowed to a crawl even in high wind situations. In this fashion, you'll never be blown of course while attempting to hook that elusive lake lurker.

The Surf To Summit Drift Chute is made from the same high quality fabric that lines many of our seats. This fabric is sewn, with industrial stitching, into a cone shape that contracts form a 54” opening to an 11” opening. The openings on either end are lined with industrial strength webbing. Four webbing straps are sewn to the large opening and converge on a singe point with a brass ring. The paddler can use any material they choose as an intermediary between the brass ring and their kayak, but we suggest the included 6' length of adjustable 1” webbing with brass clip. The webbing has a plastic tri-glide that allows the paddler to adjust the distance between the kayak and the Drift Chute. Depending on the direction of the wind, the Drift Chute can be attached to the rear, front, or side of the boat to any pad eye, loop, or clip using the marine grade, brass clip on the included webbing

MSRP:$24.99