Custom Fit Scupper Transdsducer |
Written by Andy Treweek |
Wednesday, 26 March 2014 00:00 |
Andy Treweek is a long-time yak angler from Napa, in Northern California. He fishes the coast for rockies and lings mostly The Lowrance Scupper Transducer mount did not fit well in the transducer well of my new T-15. I wanted to use my Mark 4 with GPS, so I began to modify. I started by modifying the Scupper mount. I figured I would start with the cheapest part, right? I cut off the mounting bracket and filed it flat: Then I used scissors and cut the hard rubber disc to fit flat on the transducer: Then the scary part. I cut the mounting arm off the transducer and filed back as far as I felt comfortable. I found a sharp blade did the best job job shaping the hard plastic: I gooped the hard bracket and disc to the transducer and let it set level overnight: The transducer now sits fully within the well: Rest of the install went by the book. I like the look of the Hobie thru-hull: I used rivets and a bit of goop for the mounting bracket: And the finder folds down flat to allow the shield to close with FF in place:
|
Login
Newsletter
Also of Interest
Most Popular
Every now and then we meet people who really get it. We meet them in all walks of life. For our purpose here at KFM we’re interested in fishing and specifically kayak fishing....
I met Jean when I stopped in Everglades Kayak Fishing headquarters, which are now in JT’s Cafe in Chokoloskee on my recent trip to Florida. She was working there taking...
Steve Komarinetz is the Dr. Frankenstein of the operation. He is doing some terrific installations in quite an array of kayaks. He also sells complete kits for the do it...
Random
I grew up freshwater fishing for fun. I eventually got a small aluminum that was great on the lakes, but was too small for the saltwater that is so easily accessible here in San...
My name is Brandon Beversdorf. I am a Transport Respiratory Therapist for a children's hospital during the day and an avid kayak fisherman the rest of the time. I'm a native Texan...
It's been a while since we featured an angler from the big land down under. Damian contacted us about submitting some articles. We look forward to his contributions...